grinder saw
Skid Steer Grinder Saw body is constructed of 1/4" steel, and an 1/2"X30" Blade with 19 replaceable 4-sided QUADCO teeth. 5 teeth on the outside perimeter. 10 teeth on the bottom. with 4 teeth on top. This saw only requires you to have a standard low flow machine with just 8GPM. Also is equip with a 75HP gearbox and a 2500lb manifold w/ check relief valve. Will cut up to 6" trees head on and up to 3" below ground level. For bigger trees you can drive around them
Skid Steer Grinder Saw body is constructed of 1/4" steel, and an 1/2"X30" Blade with 19 replaceable 4-sided QUADCO teeth. 5 teeth on the outside perimeter. 10 teeth on the bottom. with 4 teeth on top. This saw only requires you to have a standard low flow machine with just 8GPM. Also is equip with a 75HP gearbox and a 2500lb manifold w/ check relief valve. Will cut up to 6" trees head on and up to 3" below ground level. For bigger trees you can drive around them
SPECS:
- LOW FLOW GPM 8-20 *RECOMMEND
- RW-610 75 HP GEARBOX
- CHAR-LYNN HIGH TORQUE BMSY 200